Building Static Pressure

Flange for Pitot Tube (A301)

Static pressure probe PITOT TUBE for 1 WC or higher. Use with any static pressure switch or controller. 1/4 inch compression connection. Order A345 duct mounting flange separately

Room pressure pickup plate. 2 x 4 stainless plate with static pickup port. 1/4 barb connection.

with 90 bend. 1/4 barb connection. Order A345 flange seperately. Pitot tube with barb.

Outdoor Static Press Tip * Outdoor Static Pressure Sensor. Provides average Outdoor Pressure Signal For Reference In Bldg. Pressure Applications includes Sensor. 50 Ft. Tubing Bracket And Hardware.

Magnehelic Gauge 0-1.0WC * Magnehelic Differential Pressure Gauge. Range 0-1.0 WC. Ambient 20-140F. Two 1/8 FPT Side Or Back Mount Connections. Two 1/8 Plugs And 1/8 MPT X Barb Fitting and Flush Mount Adaptor Included.

Magnehelic Gauge 0-2WC * MAGNEHELIC GAUGE, 0-2.0 W.C.

Magnehelic Gauge 0-3WC * Magnehelic Gauge. 0-3 Water Column. 1/8Inch NPT Connections On Side Or Back Of Gauge. Adaptors For 1/4 Tubing Included along With 1/8 NPT Plugs And Flush Mount adaptors And Screws.

Surface Mounting Plate * ALUMINUM SURFACE MOUNTING PLATE FOR DWYER MAGNAHELICS.

Portability Kit for Magnhelics

Static Control .5-5WC * System 350 Electronic Pressure Control. 24V. Range .5-5 WC Throttling Range .5-5 Output 0-10Vdc Or 0-20Ma. Direct Or Reverse Acting. Order DpT2640 Transmitter separately.

Photohelic Surface Mtg Bracket * Surface Mounting Bracket. Use With Photohelic On Horizontal Or Vertical Surfaces.