Damper And Valve Actuators

Motor Shaft Ball Joint w/3/8 Thread x 5/16" Shaft BALL JOINT; HAS 3/8 FEMALE #16 THREADEDEND, SEPERATED BY THE BALL JOINT, THE OTHER END ACCOMMODATES A 5/16 PUSH ROD,ON THE END, PARALLED TO SHAFT. THREADS ONTO THE END OF THE ACTUATOR'S SHAFT.

Shaft Adaptor 3/4-1/2 * Short shaft adaptor for use with all dampers and actuators

%%%DAMPER SHAFT EXTENSION %%% * Damper shaft extension

Neman 3 Weatherproof Kit/Modiv * Modutrol IV Weatherproof Kit. Provides Neman 3 Level Protection To All Mod IV Motors.

EXTENSION/ ML6161 AND ML7161 * 2 inch shaft extension and mounting strap for ML6161

Mod IV Motor 24V 60Lb 90-160 * Valve Or Damper Motor. SPDT Or Floating 24V 21 Va. 60 Sec. Timing. 160 degrees Stroke. 60 Lb In Torque. Spring Return. Feed Back Pot For Position Indication. Replaces The M945BC & G Motors.

Economizer Damper Actuator * Economizer damper actuator for floating controls. 24 volts. Floating. 25 in/lbs toque. 90 degree CCW rotation. 8VA.

Damper Mtr 24V Use w/T87 Stat * Damper Motor 24V 2 Pos Spring Return 30 Sec. Timing. 75 degrees Stroke. 15 Lb.In. Torque. 10 Sq. Ft. Damper. 1 SPDT Aux Switch. Use With Controllers That Have Heat Anticipation.

Damper Actuator 2Pos.1 Aux.S.R * Damper Motor 24V 2 Pos Spring Return Normally Closed SPDT Aux Switch 90 Sec 90 degrees Stroke 25 Lb In Torque

Mod Iv Actu 24V 75#/ Prop.W/Au * Firing Rate Burner Motor. Proportional. 24V 19 Va. 15 Or 30 Sec. Timing. 90 Or 160 degrees Stroke 75 Lb In Torque. Replaces The M941C1006 And Others. 1 SPDT Aux. Switch.

Firing Rate Burner Motor. Proportional. 24V 19 Va. 15 Or 30 Sec. Timing. 90 Or 160 degrees Stroke. 75 Lb In Torque. 2 SPDT Aux. Switches. Shipped In 90 degrees Pos. Replaces M941D1021